Using the mail machine to only seal envelopes (no stamp mail)

1. Press the Imprint Configuration button   on the bottom left of the monitor to access the imprint screen.
   1. To change the type of stamp,  select "Stamp type - Standard".
      1. Use the arrow keys to change this to "No Printing".
      2. Select "OK" to verify.
2. Select "OK" again to return to the home screen. The home screen should now be blank.
3. Verify that the sealer lever is on. Look along the bottom of the mail machine for the blue sealant image.
4. Load envelopes on the left side.
   1. Select the large green button to start.
   2. To stop, select the red button.
5. When finished, make sure to reset the machine back to Standard Mode.